However, the general principles and concepts remain the same.
With that said, lets get started on transforming your wireless router into an access point.
This can be done using an Ethernet cable.
To begin, locate the Ethernet ports on both the router and your system.
Then, connect the other end of the cable to the Ethernet port of your system.
After ensuring a secure physical connection, power on both the router and your machine.
Wait for a few moments to allow them to fully boot up and establish a stable connection.
A loose connection can lead to connectivity issues and affect the overall performance of your access point.
This is where you could configure the necessary tweaks to turn your router into an access point.
Common default IP addresses for routers include 192.168.1.1 or 192.168.0.1. after you snag entered the IP address into the address bar, press Enter.
You will be directed to the routers login page.
Here, you may be asked to enter a username and password to jump into the parameters.
Upon successfully logging in, you will be granted access to the routers controls page.
The layout and organization of the options may vary depending on the router brand and model.
Its important to note that accessing the routers options page requires administrative privileges.
DHCP is responsible for assigning IP addresses to devices on a online grid.
By disabling DHCP, you prevent the access point from conflicting with the main networks DHCP server.
To disable DHCP on the router, navigate to the tweaks page and locate the DHCP tweaks.
This may be found under a section labeled web link prefs or LAN Setup.
after you grab located the DHCP options, go for the option to disable DHCP.
This IP address should be outside the range of the DHCP IP address pool on the main router.
To do this, specify astatic IP addressfor the router in the same subnet as the main web connection.
when you obtain disabled DHCP and assigned a static IP address to the router, save the tweaks.
The router will restart to apply the changes.
With DHCP disabled, the router is now ready to be configured as an access point.
This will allow devices to connect to the access point wirelessly and enter the web link.
On the routers controls page, navigate to the wireless controls section.
Start by setting a unique SSID for the access point.
This is the name that will appear when devices search for available Wi-Fi networks.
Choose a name that is different from the SSID of your main router to avoid confusion.
Next, choose a security option for the access point.
Additionally, you may need to select awireless channelfor the access point.
This will help prevent interference and ensure a stable wireless connection.
After configuring the wireless prefs, save the changes and wait for the router to restart if necessary.
The access point is now ready to be connected to the main online grid.
Start by disconnecting the Ethernet cable that is currently connected to your machine.
Take one end of the cable and connect it to an available LAN port on your main router.
Then, connect the other end of the cable to the WAN port on theaccess point router.
Once the physical connection is established, power on the access point router.
First, check that that the access point router is powered on and functioning properly.
Next, grab a wireless gadget such as a laptop, smartphone, or tablet.
confirm that the wireless function is enabled on the rig and search for available Wi-Fi networks.
You should see the SSID you set for the access point router appear in the list of available networks.
pick the access points SSID from the list and enter the password you set in the wireless configs.
Perform a few internet speed tests and see if the connection is stable and reliable.
If everything is working correctly, congratulations!
You have successfully set up your wireless router as an access point.
Devices can now connect to the access point and enjoy a strong and stable wireless connection.
if you bump into any issues, ensure to double-check the wireless configs, including the SSID and password.
Also, verify the physical connections between the access point router and the main router.
Start by selecting a suitable location for the access point.
Ideally, this should be a central location within the area you want to cover with Wi-Fi.
Before mounting the router, find out if it has mounting brackets or screw holes.
If it does, you could use these to securely attach it to a wall or ceiling.
This will help optimize signal propagation.
Perform another round of testing to ensure that the wireless signal strength has improved in the desired areas.
Its worth noting that the power source for the access point router should be readily accessible when mounting it.
This will make it easier to troubleshoot or make any necessary changes to the setup in the future.
You have successfully set up and mounted your wireless router as an access point.
Enjoy the extended Wi-Fi coverage and improved connectivity in your home or office.
