What is an NVMe SSD?
But what exactly is an NVMe SSD, and how does it differ from other types of SSDs?
NVMe stands for non-volatile memory express, which is a communication protocol designed specifically for SSDs.
One of the key advantages of NVMe SSDs is their incredible speed.
PCIe offers higher bandwidth and lower latency, resulting in significantly reduced loading times and improved overall system responsiveness.
Another defining feature of NVMe SSDs is their form factor.
This compact size enables easy installation in laptops, Ultrabooks, and compact desktop systems.
NVMe SSDs also offer superior performance when it comes to random read and write operations.
Additionally, NVMe SSDs are known for their low power consumption and efficient power management.
In terms of compatibility, its important to ensure that your motherboard supports NVMe SSDs before making a purchase.
Most modern motherboards have at least one M.2 slot that supports NVMe SSDs.
However, its always a good idea to check your motherboards specification or consult the manufacturer to confirm compatibility.
Why choose the Intel 660P M.2 2280 2TB NVMe PCIe 3.0 x4 3D NAND Internal SSD?
When it comes to upgrading your computers storage, there are numerous options available in the market.
Here are a few reasons why you should consider choosing this SSD for your storage needs.
Impressive Performance:The Intel 660P offers exceptional performance that surpasses traditional hard drives and even some SATA-based SSDs.
This not only enhances the overall performance of the SSD but also improves its endurance and reliability.
Cost-effective Option:The Intel 660P offers a great balance between performance and affordability.
This makes the installation hassle-free and convenient, even for users with limited technical knowledge.
Trusted Brand:Intel is a well-established and trusted brand in the technology industry.
By taking these steps beforehand, you might ensure a smooth and successful installation.
Heres what you better do:
1.
Check Compatibility:Verify that your motherboard supports M.2 NVMe SSDs and has an available M.2 slot.
Backup Your Data:Its crucial to back up your important data before proceeding with any hardware installation.
Create a backup of your files on an external storage equipment or using cloud-based services.
Heres a checklist of what you may need:
4.
Prepare Your Workspace:Find a clean, well-lit, and static-free workspace to carry out the installation.
This will minimize the risk of damaging any components and ensure a safe environment for the installation process.
Ground Yourself:Static electricity can damage sensitive electronic components.
Set aside enough time to complete the installation without rushing or feeling pressured.
Having these items ready will ensure a smooth and efficient installation process.
This will save you time and prevent any interruptions or delays during the installation.
This precaution will safeguard your components from potential ESD damage.
Step 2: Preparing your box
1.
Power off your machine:Shut down your machine and disconnect it from the power source.
This will help prevent any accidental damage to your system and ensure your safety during the installation process.
This will discharge any built-up static electricity from your body.
Find a clean and well-lit workspace:Choose a clean, well-lit area to perform the installation.
confirm you have enough space to comfortably work on your rig without any obstacles.
A clear workspace will help prevent accidental damage and make it easier to keep track of smaller components.
These slots may be labeled on the motherboard itself or mentioned in the user manual.
Identify the M.2 slot that supports NVMe SSDs and note its placement for the installation.
Step 3: Identify the M.2 slot on your motherboard
1.
Look for diagrams or labeled sections that indicate the location of the M.2 slot(s).
Pay attention to any instructions or specifications related to NVMe SSD compatibility.
Visually inspect the motherboard:With the computer case open, visually examine the motherboard for the M.2 slot.
It is typically a thin, rectangular slot that is longer than it is wide.
Take note of its position for the next step.
Check the size and keying:M.2 slots come in different sizes and key configurations.
Some motherboards may have M.2 slots that only support SATA-based SSDs.
Step 4: kick off the computer case
1.
This step removes all power sources and ensures that the computer is completely powered off.
Ground yourself:Static electricity can damage sensitive electronic components.
These screws are usually located at the back or on the edges of the case.
In some cases, the panel may also have latches that need to be released.
If your case has latches, release them to launch the access panel.
Note:The process of opening the computer case may vary depending on the specific case model and manufacturer.
With the computer case open, you could now enter the internal components, including the motherboard.
Step 5: Insert the M.2 SSD into the slot
1.
Locate the M.2 slot:Refer to the documentation or visually inspect the motherboard to find the M.2 slot.
It is a small, rectangular slot typically labeled M or M.2.
Pay attention to the keying and position of the slot.
Align the SSD:Align the notches on the SSD with the keying on the M.2 slot.
The notches are located on the longer side of the SSD, ensuring proper orientation for insertion.
Take care not to force the SSD into the slot if it doesnt align easily.
Insert the SSD:Gently slide the Intel 660P SSD into the M.2 slot at a slight angle.
Do not apply excessive force or bend the SSD during insertion.
Some motherboards have a screw or latch to secure the SSD.
If a screw is required, consult the motherboard documentation to identify the correct screw size and location.
Use a screwdriver to secure the SSD in place, ensuring it is tightly fastened but not overly tightened.
Ensure the gold connectors on the SSD are fully in contact with the slot for proper connectivity.
Step 6: Secure the M.2 SSD with the screw
1.
This hole is typically labeled or indicated in the motherboard documentation.
Take note of its position.
If not, ensure you have a small screw that fits the screw hole.
Gently guide the screw into the hole, ensuring it is aligned properly and straight.
Its crucial not to overtighten the screw as it can damage the SSD or strip the screw hole.
Gently venture to wiggle the SSD it should be snug and firmly held in place.
If there is any excessive movement, ensure the screw is adequately tightened.
Avoid over-tightening:Its important to strike a balance when tightening the screw.
Ensure the screw is appropriately tightened to provide a secure fit without excessive force.
This provides stability and ensures a reliable connection to the motherboard.
Step 7: end the computer case
1.
Align the case:Align the side panel or access panel in the correct position with the computer case.
Ensure that the panel aligns with the screw holes or latches on the case.
Slide the panel into place:Gently slide the side panel or access panel back into position.
Apply even pressure to ensure that it fits into the case properly.
If there are screws, tighten them using a screwdriver until they are snug, but avoid overtightening.
Test the closure:Verify that the case is closed securely by giving it a gentle shake.
Ensure that all screws are tightened evenly.
This step is necessary for powering on the computer and testing the newly installed SSD.
Ground yourself:Before turning on the computer, ground yourself to discharge any static electricity.
Heres how to peek if the SSD is properly recognized:
1.
Wait for the computer to boot up and reach the operating system.
Common keys to enter the BIOS/UEFI include F2, Del, Esc, or F12.
Press the corresponding key immediately when prompted to enter the BIOS/UEFI setup.
Look for your Intel 660P M.2 SSD in the list of drives or storage devices.
It should be listed with its correct capacity and model number.
Verify SSD detection:Ensure that the Intel 660P SSD is correctly recognized by the system.
The SSD should be detected as a storage gadget and display its capacity.
your box will then continue to boot into the operating system.
You have successfully installed and recognized the SSD.
Step 9: Format and initialize the M.2 SSD
1.
Open Disk Management:On Windows, right-choose the Start menu and select Disk Management from the context menu.
This will pop crack open the Disk Management utility.
Look for the Intel 660P SSD in the list.
It might be labeled as Unallocated or Raw.
Assign a drive letter:After formatting, the SSD will be assigned a drive letter.
you’re free to opt for desired drive letter or let the system assign one automatically.
This will initialize the SSD for use within the operating system.
Note:The formatting and initialization process may vary slightly depending on the operating system youre using.
However, the general steps are similar across most versions of Windows.
Conclusion
Congratulations!
Remember to always back up your important data before making any hardware changes to your system.
This ensures that your data is protected and can be easily recovered if needed.
They will be able to provide you with the necessary guidance and troubleshooting steps.
Thank you for choosing the Intel 660P M.2 2280 2TB NVMe PCIe 3.0 x4 3D NAND Internal SSD.
Enjoy your enhanced storage capabilities and improved computer performance!
